Brother International BE-1204B Instruction Manual - English - Page 242

while the needle bar case is traveling., communication is faulty

Page 242 highlights

Chapter 11 Error code list Code E-00 E-01 E-02 Error No error occurs. Either motor of main shaft, X- or Y-axis, or lower shaft has locked. Overtravel occurs during home position detecting movement. E-03 The stop switch is pressed during home position detecting movement. E-04 Home position detection out of range E-05 Needle stop position error E-06 Needle bar case position error Measures This is not usually displayed. Press the or turn on the F/B switch on the head to either side to restart the home position detecting movement again. This is not usually displayed. Adjust the pulley stop position (100 degrees) above the needle and press the either side. or turn on the F/B switch on the head to Adjust the position of needle bar case manually, then press the or turn ON the F/B switch on the head to either side. If the same error occurs again, the color change proper position sensor is faulty. E-07 E-08 E-09 Needle bar case lock Stop switch or emergency switch was pressed while the needle bar case is traveling. X-axis home position detection error Press the or turn on the F/B switch on the head to either side. If the same error occurs again, the color change mechanism is faulty. This is not usually displayed. Turn the power off and on once. If the same error occurs again, the X-axis mechanism is faulty. E-0A Thread breaking error E-0B Stop or emergency stop during sewing After passing through the thread, press the F/B switch on the head to either side. This is not usually displayed. or turn on the E-0C Lower thread broke during embroidering. E-0D E-0E The machine does not return to the home position. Mending finish After the replacement of the lower thread, press the or turn ON the F/B switch on the head to either side. This is not usually displayed. E-0F Failed in the reading of needle bar No. Press the or turn ON the F/B switch on the head to either side. If the same error occurs again, the I/O CPU communication is faulty, or the color change position sensor is faulty. E-10 Abort by the beam sensor ON Press the side. or turn ON the F/B switch on the head to either E-11 Press the or turn ON the F/B switch on the head to either Failed in the reading of X home position sensor side. If the same error occurs again, the I/O CPU communication is faulty. E-12 Press the or turn ON the F/B switch on the head to either Failed in the reading of X home position sensor side. If the same error occurs again, the I/O CPU communication is faulty. 11-2 BE-1204B-BC • BE-1206B-BC

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262

11-2
BE-1204B-BC ° BE-1206B-BC
Chapter 11 Error code list
Code
Error
Measures
E-00
No error occurs.
E-01
Either motor of main shaft, X- or Y-axis, or
lower shaft has locked.
E-02
Overtravel occurs during home position
detecting movement.
This is not usually displayed.
E-03
The stop switch is pressed during home
position detecting movement.
Press the
or turn on the F/B switch on the head to either
side to restart the home position detecting movement again.
E-04
Home position detection out of range
This is not usually displayed.
E-05
Needle stop position error
Adjust the pulley stop position (100 degrees) above the needle
and press the
or turn on the F/B switch on the head to
either side.
E-06
Needle bar case position error
Adjust the position of needle bar case manually, then press the
or turn ON the F/B switch on the head to either side. If the
same error occurs again, the color change proper position
sensor is faulty.
E-07
Needle bar case lock
Press the
or turn on the F/B switch on the head to either
side.
If the same error occurs again, the color change
mechanism is faulty.
E-08
Stop switch or emergency switch was pressed
while the needle bar case is traveling.
This is not usually displayed.
E-09
X-axis home position detection error
Turn the power off and on once.
If the same error occurs
again, the X-axis mechanism is faulty.
E-0A
Thread breaking error
After passing through the thread, press the
or turn on the
F/B switch on the head to either side.
E-0B
Stop or emergency stop during sewing
This is not usually displayed.
E-0C
Lower thread broke during embroidering.
After the replacement of the lower thread, press the
or
turn ON the F/B switch on the head to either side.
E-0D
The machine does not return to the home
position.
E-0E
Mending finish
This is not usually displayed.
E-0F
Failed in the reading of needle bar No.
Press the
or turn ON the F/B switch on the head to either
side. If the same error occurs again, the I/O CPU
communication is faulty, or the color change position sensor is
faulty.
E-10
Abort by the beam sensor ON
Press the
or turn ON the F/B switch on the head to either
side.
E-11
Failed in the reading of X home position sensor
Press the
or turn ON the F/B switch on the head to either
side. If the same error occurs again, the I/O CPU
communication is faulty.
E-12
Failed in the reading of X home position sensor
Press the
or turn ON the F/B switch on the head to either
side. If the same error occurs again, the I/O CPU
communication is faulty.