Brother International BE-1204B Instruction Manual - English - Page 198
Area Check, 7-1 External Tracing, 7-2 Automatic Hoop Movement in Area
View all Brother International BE-1204B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
Chapter 7 Operation of Machine 7. Area Check 7-1 External Tracing Embroidering star position W1278Q If is pressed in other cases than "area over", the rectangular outline of the pattern is traced. 7-2 Automatic Hoop Movement in Area 0.1 mm (Example) 0.1 mm Embroidering area W1279Q • If "area over" is displayed, press . The hoop automatically moves inside the embroidering area, where the pattern is set, at the nearest position. • After finishing the movement inside the area by this function, execute external tracing. Then, check that the needle and the presser foot do not interfere with the hoop before starting embroidering. • If the pattern is not held in the embroidering area as shown below, the hoop cannot move into the area. Enlarge the embroidering area on the operation panel. Embroidering area W1281Q 7-10 BE-1204B-BC • BE-1206B-BC