Brother International BE-1204B Instruction Manual - English - Page 163
Driving shaft, Activate escape with pause
View all Brother International BE-1204B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Chapter 6 Embroidering Driving shaft Speeds up the startup of the main shaft. Select this function when sewing thick material. 1. Select [Driving shaft] from Settings menu and check it. W1135Q 2. When the item selection is completed, click [OK]. Click to put a check mark ( ) for speeding up at the loading. Set the number of stitches for slow sewing at the start-up. W1137Q Activate escape with pause Sets whether to feed the hoop during temporary stop of the needle bars to change colors. Select this function when embroidering applique. 1. Select [Activate escape with pause] from Settings menu and check it. W1136Q BE-1204B-BC • BE-1206B-BC 6-37
BE-1204B-BC ° BE-1206B-BC
6-37
Chapter 6
Embroidering
Driving shaft
Speeds up the startup of the main shaft.
Select this function when sewing thick material.
1.
Select [Driving shaft] from Settings menu and check it.
W1135Q
2.
When the item selection is completed, click [OK].
W1137Q
Activate escape with pause
Sets whether to feed the hoop during temporary stop of the needle bars to change colors.
Select
this function when embroidering applique.
1.
Select [Activate escape with pause] from Settings menu and check it.
W1136Q
Click to put a check mark (
)
for speeding up at the loading.
Set the number of stitches for
slow sewing at the start-up.