Brother International BE-1204B Instruction Manual - English - Page 61
Lamps and switches on the thread tension stand, statuses can be checked by lamps.
View all Brother International BE-1204B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Chapter 3 Embroidering Procedures Lamps and switches on the thread tension stand The thread tension stand has lamps and switches mounted on it. Switches can set movements of the heads such as to drive, to suspend or mending, and those statuses can be checked by lamps. Thread tension stand lamp Thread tension stand switch W1258Q ! Thread tension stand lamp Shows statuses of each head of the machine. Lamp illumination Machine head status Off The head is suspended The head is not suspended but its mending is set to OFF. Some other head has an error. Illuminates green The head is ready to drive. Blinks green The head has an error. Blinking will change into illuminating when the error is cleared. Blinks red The head has a thread breakage error. Blinking will change into illuminating when the error is cleared. ! Thread tension stand switch Sets drive/suspend of each head and ON/OFF of the mending. Mending is a function to drive or suspend the head for the specified time period when the machine steps back during embroidering. • Switching of drive/suspend should be done when the machine is stopped. • Switching of the mending should be done when the machine is suspended during embroidering. Flip the switch up to suspend the head. Flip up the switch further to switch ON/OFF the mending. Flip the switch down to suspend the head. W1259Q BE-1204B-BC • BE-1206B-BC 3-5