Brother International BE-1204B Instruction Manual - English - Page 50
Attachment of Embroidery Hoop and Frame, Tubular square hoop
View all Brother International BE-1204B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Chapter 2 Preparation of Embroidery Machine 3-4 Attachment of Embroidery Hoop and Frame ! Tubular square hoop BE-1204B,BE-1206B [1] [4] [2] [3] 1. Loosen the thumb bolt M6 [1] to draw it to the center. 2. Align the positioning hole on the tubular round arm frame [4] with the positioning pin [2] [3] (S58665) on the X-feed sash [5] (S58650), and fit the tubular round arm fixing nut [2] on the back side of the thumb bolt M6 [1] into the hole on the X-feed sash. 3. While keeping the nut in the hole, slide the [5] thumb bolt M6 toward the edge and tighten it firmly at the outermost point. W1243Q BE-1204C The frame is fixed to the position of (1) for 360 pitch, so is to (2) for 400 pitch and to (3) for 500 pitch. 1. The tublar round arm frame R [4] is fixed with the thumb bolt [5] to the connecting plate [6] to align with each pitch. At the same time, put the positioning pin [7] into a hole at the center of the tublar round arm frame R [4]. 2843M 2. Insert the grooves of the tublar round arm frame L [8] and R [4] onto the thumb bolt M6 [10] on the X-feed sash [9] so as to align with each pitch and fix them. 2-22 2844M BE-1204B-BC • BE-1204C-BC • BE-1206B-BC