Brother International BE-1204B Cap Frame Device Instruction Manual - English - Page 18
plate [6] do not interfere each other.
View all Brother International BE-1204B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
6. 手順 4 5 A[8 1 6. If enough clearance is assured in the procedure 4, adjust the sliding sheet [5] to touch the upper surface of the bed cover A [8], then fasten the screw [1]. X N[7 6 Note) Move the X-feed sash right and left to confirm that the cap frame sash N [7] and the driver support plate [6] do not interfere each other. Also confirm that they do not interfere the next cap frame driver. 16 Electronic embroidery machine
16
Electronic embroidery machine
6.
手順
4
ですき間が確保できた場合は、スベリヨウシート
[5]
がベッドカバー
A[8]
の上面に当たる
ようにし、締めネジ
[1]
を締めます。
6.
If enough clearance is assured in the procedure 4, adjust the sliding sheet [5] to touch the upper
surface of the bed cover A [8], then fasten the screw [1].
注意
)
このとき、
X
オクリサッシを左右に動かして、ボウシワクサッシ
N[7]
とドライバササエイタ
[6]
が干渉していないことを確認してください。
また、隣の帽子枠ドライバーと干渉しないことも確認してください。
Note)
Move the X-feed sash right and left to confirm that the cap frame sash N [7] and the driver support
plate [6] do not interfere each other.
Also confirm that they do not interfere the next cap frame driver.