Brother International BE-1204B Cap Frame Device Instruction Manual - English - Page 19

Adjustment of the wire tension [2] [1] [3] [4] [5] [6] 3mm W1430Q 7mm 0.45kg 3mm 1 1]2 1. Loosen the two screws [1]. W1431Q 2 3 2 3 4 N[5 6 3mm C（0.45kg）を 1 N[5 6 7mm 2. Loosen the fixing nut [2] of the tension adjustment screw [3] to adjust the tension using the tension adjustment screw [3]. Follow the conditions below for the adjustment: * The clearance between the cap frame sash N [5] and the wire [6] should be about 3 mm with the driver fixed by the thumb screw [4]. * When the wide set frame C (0.45 kg) is hung from the point illustrated, the clearance between the cap frame sash N [5] and the wire [6] should be about 7 mm. 3 1 2 3. After the adjustment is completed, fasten the screw [1] and the fixing nut [2] firmly. Electronic embroidery machine 17