Brother International BE-1204B Instruction Manual - English - Page 167

Chapter 6 Embroidering Default Settings Resets changes of the machine setting to the default. ! Items for setting and initialization are as follows: Speed Range Automatically selects the value suitable for the hoop type. Head Operation Suspend Cancels the head operation which is not set for rest on the machine. Hoop Feed Position Returns to the machine home position. Embroidering Area Sets the size each for the selected hoop. Thread Trimming Inching motion Thread removal feed length Thread remaining amount Yes 15 mm (0.6 inch) 5 Thread Breakage Sensor All sensors are on. Sensitivity 10 Automatic Step Back 0 Thread Breakage Sensor Sensitivity Not affected by the thread breakage sensor sensitivity Automatic Feed Hoop No Return to the start point Yes Mending Automatically rest breakage error Automatically reset the rotary hook thread entanglement error Raise the presser foot when resetting the thread trimming error Stop the machine at the mending end position Stitches before mending Trim during stop in mending setting Conduct lock stitch when trimming thread No No Yes Yes 1 stitch No No Adjustment 0.0 mm for X direction 0.0 mm for Y direction Main shaft speed up setting Activating speed up of driving shaft No Low speed stitches 3 Hoop feed during temporary No stop Reducing speed in a small No pitch Thin / Thick material 110 degrees (100 degrees for cap frame) Area Trace "8 corner" is selected. Trace with needle No.1 Yes BE-1204B-BC • BE-1206B-BC 6-41