Brother International BE-1204B Instruction Manual - English - Page 55
Lower thread tension, This tension may vary depending on the used thread.
View all Brother International BE-1204B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Chapter 2 Preparation of Embroidery Machine 3. For adjusting the height, loosen the screw [1] and turn the tension spring bracket [2]. 4. For adjusting the tension spring force, insert a driver tip in the groove of the thread tension bar [3] and turn it. ! Lower thread tension To tighten To loosen W1251Q W1252Q The standard tension of the lower thread is 0.15 ~ 0.3N. This tension may vary depending on the used thread. In general, press the bobbin case to a smooth vertical surface and hang the designated number of coins. Turn the thread tension screw so that the lower thread will come out smoothly. Check that the bobbin is pushed out of the bobbin case by about 0.5 mm. If not, the slip prevention spring of the bobbin case does not work. Adjust the spring in height or replace it with a new one. (Refer to "Replacing Bobbin" on page 2-19.) We recommend the use of the option gauge set TM-3 (S59956-001). W1396Q BE-1204B-BC • BE-1206B-BC 2-27