Brother International BE-1204B Instruction Manual - English - Page 33
Installation of Machine, the machine is placed down. To lower adjustment bolt M20 [1]
View all Brother International BE-1204B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
2-2 Installation of Machine Chapter 2 Preparation of Embroidery Machine [5] [1] [4] [3] [2] W1224Q 1. Place Footboard [4], a rubber cushion 10 [3] (provided with the machine), and PE sheet [2] under each of four adjustment bolts M20 [1]. The Footboard must be on the rubber cushion. 2. Fit four adjustment bolts M20 [1] into the hole of Footboard [4], and adjust the embroidery machine in height. The adjustment must be made in such a manner that the four bolts are under an equal load when the machine is placed down. (To lower adjustment bolt M20 [1], turn it in the direction of the arrow.) Also, the casters should be raised. 3. After adjusting four adjustment bolts M20 [1], turn nuts M20 [5] in the direction of the arrow to fasten them. If the floor is not strong enough, the embroidery machine may be rocked during operation. In such a case, it is recommended that a secure base of concrete be placed below the embroidery machine. BE-1204B-BC • BE-1206B-BC 2-5