Brother International BE-1204B Instruction Manual - English - Page 6
Maintenance and inspection, specified by Brother.
View all Brother International BE-1204B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Maintenance and inspection Maintenance and inspection of the sewing machine should only be carried out by a qualified technician. Ask your Brother dealer or a qualified electrician to carry out any maintenance and inspection of the electrical system. Turn off the power switch and disconnect the power cable (do not pull on the cable itself) from the wall outlet before attempting to perform the following operations. Otherwise, the machine is started if the start switch is pressed by mistake. Injury may occur in such a case. • When carrying out inspection, adjustment, or maintenance • When replacing consumable parts such as a rotary hook, a knife, or a fluorescent lamp If the power switch needs to be left on when carrying out some adjustment, be extremely careful to observe all safety precautions. Use only the proper replacement parts as specified by Brother. When replacing a fluorescent lamp, use the same-type lamp having a rating of 40 watts. Wait until the fluorescent lamp cools off before replacement. Failure to do so can result in burns. If any safety devices have been removed, be absolutely sure to re-install them to their original positions and check that they operate correctly before using the machine. Any problems in machine operation which result from unauthorized modifications to the machine will not be covered by the warranty. 4 BE-1204B-BC • BE-1206B-BC