Brother International CP60X Sewing Guide - Page 14
Sewing hook-and-loop fastener tape
View all Brother International CP60X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
USEFUL SEWING TIPS ■ Sewing hook-and-loop fastener tape CAUTION • Use only the adhesive-free hook-andloop fastener tape which is designed for sewing. When the glue adheres to the needle or the bobbin case, it may cause malfunction. • If the hook-and-loop fastener tape is sewn with the thin needle (65/9-75/ 11), the needle may bend or break. Note • Before sewing, baste together the fabric and the hook-and-loop fastener tape. Make sure that the needle passes through the hook-and-loop fastener tape by turning the handwheel and lower the needle into the hookand-loop fastener tape before sewing. And then, sew the edge of the hook-and-loop fastener tape at a slow speed. If the needle does not pass through the hookand-loop fastener tape, replace the needle with the needle size for thicker fabrics. For details, refer to "Fabric/Thread/Needle Combinations" on the Operation Manual. 1 1 Edge of the hook-and-loop fastener tape 14