Brother International CP60X Sewing Guide - Page 21

the free arm, make sure that the fabric, Slide the item that you wish to sew onto

Get Brother International CP60X PDF manuals and user guides View all Brother International CP60X manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

UTILITY STITCHES Unfold the edge of fabric, and position e the fabric with the wrong side facing up. a c f b d a ac af a a e b 1 Wrong side of fabric 2 Right side of fabric 3 Edge of fabric 4 Desired edge of hem 5 Basting point 6 Basting Attach blind stitch foot "R". f Select a stitch. g * Stitches may differ depending on the model. Check stitch selections on the machine's body, and then select the stitch number. Remove the flat bed attachment to use h the free arm. Slide the item that you wish to sew onto i the free arm, make sure that the fabric feeds correctly, and then start sewing. UTILITY STITCHES Position the fabric with the edge of the j folded hem against the presser foot guide, and then lower the presser foot lever. 1 Wrong side of fabric 2 Fold of hem 3 Presser foot guide Adjust the stitch width until the needle k slightly catches the fold of the hem. For details of stitch width, refer to the Operation Manual. 1 Needle drop point When you change the needle drop point, raise the needle, and then change the stitch width. * To make fine adjustments to the needle drop point, adjust the stitch width setting. (The stitch width setting is in neither millimeters nor inches.) a b 1 Thick fabric 2 Normal fabric 1 Free arm 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
21
UTILITY STITCHES
UTILITY STITCHES
e
Unfold the edge of fabric, and position
the fabric with the wrong side facing up.
a
b
f
c
a
a
c
d
a
f
a
a
b
e
<Thick fabric>
<Normal fabric>
<Seen from the side>
1
Wrong side of fabric
2
Right side of fabric
3
Edge of fabric
4
Desired edge of hem
5
Basting point
6
Basting
f
Attach blind stitch foot “R”.
g
Select a stitch.
*
Stitches may differ depending on the
model. Check stitch selections on the
machine’s body, and then select the
stitch number.
h
Remove the flat bed attachment to use
the free arm.
i
Slide the item that you wish to sew onto
the free arm, make sure that the fabric
feeds correctly, and then start sewing.
1
Free arm
j
Position the fabric with the edge of the
folded hem against the presser foot guide,
and then lower the presser foot lever.
1
Wrong side of fabric
2
Fold of hem
3
Presser foot guide
k
Adjust the stitch width until the needle
slightly catches the fold of the hem.
1
Needle drop point
For details of stitch width, refer to the
Operation Manual.
When you change the needle drop point,
raise the needle, and then change the
stitch width.
*
To make fine adjustments to the needle
drop point, adjust the stitch width
setting. (The stitch width setting is in
neither millimeters nor inches.)
a
b
1
Thick fabric
2
Normal fabric