Brother International CP60X Sewing Guide - Page 45

Heirloom stitching, select a stitch width of 6.0 mm 15/64

Get Brother International CP60X PDF manuals and user guides View all Brother International CP60X manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

UTILITY STITCHES ■ Heirloom stitching (for models equipped with the monogramming foot "N") When sewing with the wing needle, the needle holes are enlarged, creating a lace-like decorative stitch. This is used to decorate hems and tablecloths on thin or medium weight fabrics in addition to plain weave fabrics. Install the wing needle. a Start sewing. d UTILITY STITCHES • Use a 130/705H 100/16 wing needle. • For details on replacing a needle, refer to the Operation Manual. • The needle threader cannot be used with the wing needle, otherwise the machine may be damaged. Manually pass the thread through the eye of the needle from the front to the back. Attach monogramming foot "N". b Select a stitch. c * Stitches may differ depending on the model. Check stitch selections on the machine's body, and then select the stitch number. CAUTION • When sewing with the wing needle, select a stitch width of 6.0 mm (15/64 inch) or less, otherwise the needle may bend or break. • After adjusting the stitch width, slowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break. 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
45
UTILITY STITCHES
UTILITY STITCHES
■
Heirloom stitching
(for models equipped with the monogramming
foot “N”)
When sewing with the wing needle, the needle
holes are enlarged, creating a lace-like
decorative stitch. This is used to decorate hems
and tablecloths on thin or medium weight
fabrics in addition to plain weave fabrics.
a
Install the wing needle.
•
Use a 130/705H 100/16 wing needle.
•
For details on replacing a needle, refer
to the Operation Manual.
•
The needle threader cannot be used
with the wing needle, otherwise the
machine may be damaged. Manually
pass the thread through the eye of the
needle from the front to the back.
b
Attach monogramming foot “N”.
c
Select a stitch.
*
Stitches may differ depending on the
model. Check stitch selections on the
machine’s body, and then select the
stitch number.
•
When sewing with the wing needle,
select a stitch width of 6.0 mm (15/64
inch) or less, otherwise the needle may
bend or break.
•
After adjusting the stitch width, slowly
turn the handwheel toward you
(
counterclockwise)
and check that the
needle does not touch the presser foot.
If the needle hits the presser foot, the
needle may bend or break.
d
Start sewing.
CAUTION