Brother International DCP-J140W Users Manual - English - Page 47
Stop/Exit, power source and take out the paper. - troubleshooting
View all Brother International DCP-J140W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
f Using both hands, grasp the plastic tabs on both sides of the machine and lift the scanner cover (1) until it locks securely in the open position. 1 3 2 Troubleshooting Important • If the paper is jammed under the print head, unplug the machine from the power source, and then move the print head to take out the paper. • If the print head is in the right corner as shown in the illustration, you cannot move it. Re-connect the power cord. Hold down Stop/Exit until the print head moves to the center. Then unplug the machine from the power source and take out the paper. Move the print head (if necessary) to take out any paper remaining in this area. Make sure that jammed paper is not left in the corners of the machine (2) and (3). B • If ink gets on your skin or clothing immediately wash it off with soap or detergent. g Lift the scanner cover to release the lock (1). Gently push the scanner cover support down (2) and close the scanner cover (3) using both hands. 1 2 3 h Push the paper tray firmly back into the machine. 37