Brother International HL-2240 Users Manual - English - Page 131

Appendix Print surface A The characteristics of the face side and reverse side of a sheet of paper may vary a little. Usually, the opening side of the paper ream package is the print side. Follow the instructions on the paper package. Typically, the print side is indicated by an arrow. Moisture content A Moisture content is the amount of water left in the paper after manufacture. It is one of the important characteristics of the paper. This can change greatly depending on the storage environment, although usually paper contains about 5% water by weight. Because paper often absorbs water, the amount of water can sometimes be about 10% in a high humidity environment. When the amount of water increases, the characteristics of the paper changes greatly. The fixing of the toner may become worse. For storage of the paper and during use, we recommend that the humidity of the surrounding environment be between 50% and 60%. A Rough estimate of basis weight A g/m2 60 64 75 90 105 120 135 163 lb Bond 16 17 20 24 28 32 36 43 Index 90 Paper size Paper size Letter Legal Executive A4 A5 A5 Long Edge A6 Envelope Monarch Envelope Com-10 Envelope DL Envelope C5 B5 (JIS) mm 210  297 mm 148  210 mm 210  148 mm 105  148 mm 110  220 mm 162  229 mm 182  257 mm A in. 8.5  11 in. 8.5  14 in. 7.25  10.5 in. 3.875  7.5 in. 4.12  9.5 in. 127