Brother International Innov-is 500D Users Manual - English - Page 122
Sewing the Various Built-In Decorative Patterns
View all Brother International Innov-is 500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
SE-BrotherE_sgml.book Page 116 Monday, June 30, 2003 3:44 PM UTILITY STITCHES Sewing the Various Built-In Decorative Patterns Besides utility stitches, you can sew decorative stitches, satin stitches and cross-stitches. All are sewn with monogramming foot "N". Sewing beautiful patterns Sewing patterns In order to sew the patterns correctly, the following must be considered. ■ Fabric Before sewing stretch or thin fabrics or fabrics with a coarse weave, affix stabilizer material to the wrong side of the fabric or place a thin sheet of paper, such as tracing paper, under the fabric. Since material puckering or bunched stitches may occur when satin stitches are sewn, be sure to affix stabilizer material to the fabric. ■ Needles and threads When sewing thin, mediumweight or stretch fabrics, use the ball point needle. When sewing thick fabrics, use a 90/14 home sewing machine needle. In addition, #50 to #60 thread should be used. ■ Trial sewing Depending on the type and thickness of the fabric being sewn and whether or not stabilizer material is used, the desired result may not be achieved. Be sure to sew a trial piece of fabric before sewing your project. In addition, while sewing, be sure to guide the fabric with your hands in order to prevent the fabric from slipping. Attach monogramming foot "N". a • For details, refer to "Replacing the presser foot" (page 40). Select a stitch. b • For details, refer to steps c through h of "Selecting stitching" (page 66). Start sewing. c • The stitching is sewn in the direction indicated by the arrow. Sew reinforcement stitches. d • When sewing a pattern, it is useful to first set the automatic reverse/reinforcement stitching setting. For details, refer to "Automatically sewing reverse/reinforcement stitches" (page 59). When you are finished sewing, use scissors to e trim off any excess threads at the beginning of the stitching and between the patterns. Memo z For details on adjusting the stitch width and length, refer to "Adjusting the Stitch Width and Length" (page 56). 116