Brother International Innov-is 500D Users Manual - English - Page 99
When sewing, be sure that the needle, does not touch the zipper, otherwise the, needle may bend or
View all Brother International Innov-is 500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
SE-BrotherE_sgml.book Page 93 Monday, June 30, 2003 3:44 PM Topstitch around the zipper. n Sew reverse stitches at the end of the zipper opening and align the zipper teeth with the side of the presser foot. 3 2 4 1 5 a Right side of fabric b End of zipper opening c Reverse stitches d Beginning of stitching 3 e Basting stitching CAUTION ● When sewing, be sure that the needle does not touch the zipper, otherwise the needle may bend or break. When you are about 5 cm (2 inch) from the o end of the zipper, stop the sewing machine with the needle lowered (in the fabric), and then raise the presser foot lever. Remove the basting stitching, open the zipper, p and then continue sewing. Zipper Insertion 93
Zipper Insertion
93
3
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
n
Topstitch around the zipper.
Sew reverse stitches at the end of the zipper
opening and align the zipper teeth with the side
of the presser foot.
a
Right side of fabric
b
End of zipper opening
c
Reverse stitches
d
Beginning of stitching
e
Basting stitching
CAUTION
o
When you are about 5 cm (2 inch) from the
end of the zipper, stop the sewing machine
with the needle lowered (in the fabric), and
then raise the presser foot lever.
p
Remove the basting stitching, open the zipper,
and then continue sewing.
●
When sewing, be sure that the needle
does not touch the zipper, otherwise the
needle may bend or break.
1
2
3
4
5
SE-BrotherE_sgml.book
Page 93
Monday, June 30, 2003
3:44 PM