Brother International Innov-is 500D Users Manual - English - Page 137
Attaching the embroidery foot
View all Brother International Innov-is 500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
SE-BrotherE_sgml.book Page 131 Monday, June 30, 2003 3:44 PM Attaching the embroidery foot Attachment of the embroidery foot is explained here. Attaching the embroidery foot Attach the embroidery foot when embroidering. Have the included embroidery foot "Q" and a screwdriver ready. 1 2 a Embroidery foot bar b Caught by the presser foot holder CAUTION ● Before replacing the presser foot, be sure to turn off the sewing machine, otherwise injuries may occur if the start/stop button is accidentary pressed and the machine starts sewing. Raise the presser foot lever. c CAUTION 4 ● Always use the embroidery foot "Q" when embroidering. If the wrong presser foot is 1 used, the needle may hit the presser foot and break or bend. X The presser foot is raised. Press (Needle position button) once or a twice to raise the needle. • At the time of purchase, the presser foot lever is up. Press and hold the black button on the back of d the presser foot holder to release it. 1 1 a The needle goes up. Turn off the sewing machine. b 2 a Black button b Presser foot holder X Detach the presser foot from the presser foot holder. Attaching the embroidery foot 131