Brother International Innov-is 500D Users Manual - English - Page 92
Lower the presser foot lever and
View all Brother International Innov-is 500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
SE-BrotherE_sgml.book Page 86 Monday, June 30, 2003 3:44 PM UTILITY STITCHES ■ Changing the stitch width Adjust the stitch width. ■ Sewing buttonholes on stretch fabrics When sewing buttonholes on stretch fabrics, use a gimp thread. Hook the gimp thread onto the part of a buttonhole foot "A" shown in the illustration. • For details, refer to "Adjusting the stitch width" (page 56). Memo z Before sewing buttonholes, check the stitch length and width by sewing a trial buttonhole on a scrap piece of fabric. It fits into the grooves, and then loosely tie it. b Attach buttonhole foot "A". c • For details, refer to "Replacing the presser foot" (page 40). Select stitch 46 or 47 . d Adjust the stitch width to the thickness of the e gimp thread. Lower the presser foot lever and the f buttonhole lever, and then start sewing. When sewing is finished, gently pull the gimp g thread to remove any slack. Use a handsewing needle to pull the gimp h thread to the wrong side of the fabric, and then tie it. 86