Brother International Innov-is 500D Users Manual - English - Page 160

SE-BrotherE_sgml.book Page 154 Monday, June 30, 2003 3:44 PM EMBROIDERY Convenient Functions Ways for fixing problems when there are mistakes in adjustments and colors for the pattern and convenient functions will be explained here. Adjusting the layout The pattern is normally positioned in the center of the embroidery frame. You can check the layout before starting embroidery and change the position and the size. After selecting the embroidery pattern, press a . Embroidery frame size The size of embroidery frame that can be used is displayed. When the smaller mark is grayed out in the display, embroidery frame (small) cannot be used. Size key Increases/decreases the size of the embroidery. If is pressed, it returns to the previous screen. X The screen for changing the pattern is displayed. Press . b X The layout screen is displayed. Check and adjust the layout. c 1 2 3 4 5 6 0 8 7 9 a Layout within the frame b Embroidery frame (M/S) used c 90 degree rotation key d Size key e Horizontal mirror image key f Stitch beginning key g Trial key h Change position key i Pattern size/position switching key j Embroidery size (cm) 154 Decrease size Return to original size Increase size Pattern size/position switching key Switches between pattern size and position displays. When it is , the pattern size is displayed in the lower left (Example: ). When it is , the distance moved is displayed (Example: ). Change position key Moves the embroidery position up, down, left and right. Return to center position (when the pattern was moved with the change position key) • If you make a note of the values in the lower left when you change the size and position, you can sew with the same size and layout even if you have to turn the power back on in the middle of your work. 90 degree rotation key Rotates the embroidery 90° each time. The direction of the arrow points to the top of design.