Brother International Innov-is 6000D Operation Manual for Premium Pack III Opt - Page 13

USING THE CAMERA TO CONNECT PATTERNS Instead of using thread marks, the camera can be used to connect patterns in the Embroidery Edit screen. An area of 27 cm × 17 cm (10-1/2 inches × 6-1/2 inches) can be embroidered when the camera is used to connect patterns. Select the appropriate frame depending on the size of the embroidery. We recommend using the large embroidery frame (30 cm × 20 cm (12 inches × 8 inches)) when using the camera to connect patterns. The small embroidery frame (2 cm × 6 cm (1 inch × 2-1/2 inches)) cannot be used with the camera function. c Note • Split (Large-size) embroidery patterns cannot be used with this function. Examples of Connected Patterns Two patterns can be connected by selecting the reference point and reference edge of each pattern so that they can be aligned using the camera. When connecting patterns, the reference edge of each pattern will be along a single straight line. (Example) d : Reference edge : Reference point a e b In order to understand how to connect patterns, first try following the procedure outlined in "Practice (Connecting Three Patterns)" on page 14. 12