Brother International Innov-is 6000D Operation Manual for Premium Pack III Opt - Page 19

o Using both hands affix the second embroidery positioning mark within the red lines by pressing down on each corner of the positioning mark onto the material and then touch . p After the two positioning stickers have been detected, the following message appears. a a Embroidering area While making sure that the two positioning stickers do not peel off, remove the embroidery frame from the machine, and then rehoop the fabric. Be sure to hoop the fabric so the next pattern and both the positioning stickers are within the embroidery sewing area. Reattach the frame and press . → The camera detects the second positioning sticker. a Pattern to be embroidered next b Centers of large circles for stickers c Embroidery sheet Note • If the machine detects that the next pattern and the centers of the large circles of the two positioning stickers do not fit within the embroidering area, the operation will be paused. Follow the on-screen instructions to reposition the positioning stickers. Refer to "Changing the Position of a Sticker" on page 22 to reposition the stickers. • If the sticker peels off during this procedure, the patterns cannot be connected. If this occurs, restart the procedure from the beginning. 18