Brother International Innov-is 6000D Operation Manual for Premium Pack III Opt - Page 23
Changing the Position of a Sticker, Connecting Three Patterns using
View all Brother International Innov-is 6000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Changing the Position of a Sticker If the selected pattern or positioning stickers for connecting the next pattern do not easily fit in the embroidering area, follow the on-screen instructions that appear after step o on page 18 in order to move the positioning stickers. For an example, the on-screen instruction appears when you use the embroidery frame with a size of 10 cm × 10 cm (4 inches × 4 inches) to connect patterns as shown below. Note • When referring to steps a through o, make sure you change the reference edge and reference point to reflect this exercise. a Pattern1X.pes b Pattern2X.pes a Refer to steps a through o of "Practice (Connecting Three Patterns)" using the embroidery frame with a size of 10 cm × 10 cm (4 inches × 4 inches) to embroider the first pattern and to connect the second pattern. 22