Brother International Innov-is 6000D Operation Manual for Premium Pack III Opt - Page 15

4. Press to initiate the calibration process. For safety please make sure area around needle is clear prior to pressing . → Setting the needle drop point begins. e The operation is finished when "OK" appears. If "NG" appears, remove the sticker, and then follow the on-screen instructions to repeat steps 3 and 4 of Stepd. If multiple attempts to set the position are not successful, contact your nearest Brother dealer. Practice (Connecting Three Patterns) In order to practice aligning pattern edges by using the camera, we will connect three patterns as shown below. These 3 patterns for practicing are available on the included CD. manual sample a Pattern1X.pes b Pattern2X.pes c Pattern3X.pes Note • Use USB media or a computer to access the pattern files. a Select the first pattern (1) for practicing, and then press . f Remove the sticker, and then turn off the machine. Note • When using the camera to connect patterns, use the needle that was installed when the camera needle position was set. b Thread the machine with the upper thread and the bobbin thread. 14