Brother International LK3-B431 MKII Instruction Manual - Page 45
LK3-8430E, B431E, B432E, B433E
View all Brother International LK3-B431 MKII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
10.STANDARD ADJUSTMENTS 10-10. Work clamp closing-distance adjustment (8432E Mark II) 0.3 - 0.5mm O O 1. With the presser closing lever 0 pushed all the way by hand in the direction of the arrow in the illustration, loosen the nut 0 and move the presser closing roller 0 so that the gap is 0.3 - 0.5 mm when the work clamp is closed while the sewing machine is in operation. * As the presser closing roller is brought closer to the presser closing lever 0, the gap of the work clamp is narrowed. Note, however that if the presser closing roller 0 is moved closer than necessary, the operation of the presser closing lever 0 may be impaired. 9 8 O O 8 - 9mm 3 - 4mm 2. By loosening the nut 0 and turning the stop lever adjusting screw 0, adjust the stop lever 0 so that it separates from the stop position adjusting plate 0 when the work clamp is elevated 8 - 9 mm above the surface of the needle plate. 3. Loosen the nut 0 and move the work clamp so that the closing distance becomes 3 - 4 mm when the work clamp is in the lowered position. Then, push the nut 0 all the way in the direction indicated by the arrow, and tighten it. 10-11. Work clamp interchangeability (B433E Mark II) The B430E Mark II work clamp can also be used with the B433E Mark II. Remove the screw 0, washer 0 and cover support 0 stand 0, and then change the installation position for (S) the presser arm assembly 0 from the standard instal- lation position ® to installation position 8. 3 A 0 B LK3-8430E-, B431E-, B432E-, B433E- Mark II S8