Brother International LK3-B431 MKII Instruction Manual - Page 58
c1-1.
View all Brother International LK3-B431 MKII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
13. CHANGING SPECIAL FUNCTIONS USING THE MEMORY SWITCHES Using a cycle sewing program 1. When "c1-1" is flashing in the display window m, press the foot switch to the second step. 2. Start sewing. 3. "c1-1", "c1-2", "c1-3" are sewn in order for each article, and when the last-recorded pattern has been sewn, the display returns to "c1-1". * If you press one of the DISPLAY SET switches m when "c1-*" is displayed, you can return to the previous stitch pattern or skip a e stitch pattern. * If you press the SELECT switch when "c1-*" is displayed, you can check the contents of the recorded user program. Clearing a cycle sewing program 1. Switch the machine to recording mode by the procedure in step 3. of recording a user program. • 2. Use one of the P* switches (user program switches) to specify which cycle sewing program to clear. * Press the P1 switch 0 if you would like to clear cycle sewing program No, 1. ("Pc 1" will be displayed.) • e. 3. Press the RESET switch * The recorded contents of the specified cycle sewing program will then be cleared. * If you press and hold the RESET switch until after the buzzer has sounded twice, all cycle sewing programs will be cleared. NOTE: If you clear a user program after any cycle sewing programs have been recorded, all recorded cycle sewing programs will also be cleared. 51 LK3-B430E-, 6431E-, B432E-, B433E- Mark II