Brother International MFC-290C Software Users Manual - English - Page 56

Scanning Brother Scanner Utility 2 The Brother Scanner Utility is used to configure the WIA scanner driver for resolutions greater than 1200 dpi and for changing the Maximum Scanning Size setting. „ For Letter scanning models 2 If you want to set Legal size as the default size, check Legal in the Brother Scanner Utility dialog box. You must restart your PC for the new settings to take effect. „ For 11 x 17 scanning models If you want to choose Tabloid or Legal size as the scan page size, check A3/Ledger in the Brother Scanner Utility dialog box. You must restart your PC for the new settings to take effect. Note If you scan the document at a resolution of greater than 1200 dpi, the file size may be very large. Make sure that you have enough memory and hard disk space for the size of the file you are trying to scan. If you do not have enough memory or hard disk space then your PC may freeze and you could lose your file. „ Running the utility You can run the utility by clicking the Scanner Utility located in Start/All Programs/Brother/MFC-XXXX menu (where XXXX is your model name)/Scanner Settings. 48