Canon BJ-200E User Manual - Page 72
DIP Switch Settings
View all Canon BJ-200E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Horizontal margins Print direction (text) Font typeface Horizontal print position Text scale mode Envelope mode Reduction mode Page length Character set Automatic line feed (LF) Alternate Graphics Mode Code page Buffer Printer control mode Automatic emulation switching mode Left margin = 0 Right margin = maximum print width Bi-directional Courier Letter Disabled Disabled Disabled 11 inches Character Set 1 Disabled (no automatic LF after CR) Disabled 437 (IBM USA) Input = Approx. 50.4 KB Download = 0 KB BJ-10 Disabled NOTE: This printer has two printer control modes: BJ-10 mode, which emulates the IBM Proprinter X24E, and Epson LQ mode, which emulates the Epson LQ-510. The default setting is BJ-10 mode. If you change this to Epson LQ mode, the default settings also change. DIP Switch Settings The DIP switch settings control various printer functions, such as the page length and character set you want to use. The printer functions defined by the DIP switches are determined by the printer control mode. DIP switch 11 selects the printer control mode. When DIP switch 11 is OFF, the printer is in BJ-10 mode. When DIP switch 11 is ON, the printer is in Epson LQ mode. BJ-10 Mode When the printer is in BJ-10 mode (DIP switch 11 is OFF), you can set the DIP switches to control the following functions: