Canon BJ-200E User Manual - Page 73

DIP switch 1 2 3 4 5, 6, 7 8 9 10 11 12 Function OFF Horizontal print position Letter size or COM 10 envelope Text scale mode Disabled Page length 11 inches Character set Set 1 Code page See following descriptions Automatic carriage Normal line feed (LF) return (CR) Alternate Graphics Disabled Mode (AGM) Buffer size Input: 50.4 KB Download: 0 KB Printer control mode Automatic emulation switching mode BJ-10 mode Disabled ON A4 size or DL size envelope Enabled 12 inches Set 2 LF with CR Enabled Input: 9.4 KB Download: 41 KB Epson LQ mode Enabled DIP Switch Functions DIP switch 1 Use this switch to change the horizontal print position according to the size of your paper. If you are using letter-size paper or COM 10 envelopes, set this switch OFF; the left margin will be 0.25 inch (6.4). If you are using A4-size paper or DL-size envelopes, set this switch ON; the left margin will be 0.13 inch (3.4 mm). DIP switch 2 If you are using a software application that assumes 66 lines will fit on each page, set this switch to ON. The printer will reduce the line spacing by a factor of 14/15, which is from 62 lines per page to 66 lines per page if line spacing is set to 6 lines per inch (lpi). DIP switch 3 If you are using letter-size paper, set this switch OFF; this sets the page length to 11 inches. If you are using A4-size paper, set this switch ON; this sets the page length to 12 inches. DIP switch 4 When this switch is OFF, the printer uses Character Set 1. When this