Canon DIGISUPER 80 manual for XJ100x9.3B AF XJ100x9.3B XJ95x12.4B XJ95x8.6B XJ - Page 117

[Focus]­- Curve Focus demand curve characteristics The focus demand curve characteristics can be set when focus control is performed from the camera. (However, this is not possible when using serial data control.) Top screen CAFS CAFS setting The changes in the view angle caused by focusing can reduce to the zero level. Top screen × 3 × 3, Focus screen to select (to set to FAR mode) Infinity FAR mode Focus position Close range Knob position NEAR STD mode mode or to select (flashing) Selection item Function (to set to OFF) (D) ON Enabled OFF Disabled (D): Default value (Standard mode) (Far mode) (Near mode) The Standard mode has the characteristics where the relationship between the rotation amount of the control knob and the moving amount of the focus lens group is almost in linear. The Far mode facilitates focusing on an object in the far end, by making the far end curve characteristics gentle to increase the far end resolution. Contrary to the Far mode, the Near mode facilitates focusing on an object in the near end, by making the near end curve characteristics gentle to increase the near end resolution. Selection item (D) STD FAR NEAR (D): Default value E9