Canon DIGISUPER 80 manual for XJ100x9.3B AF XJ100x9.3B XJ95x12.4B XJ95x8.6B XJ - Page 53

2 PREPARATION 2-6 Setting on the Information Display The table below shows the functions that can be set from the information display. For the detailed setting method, refer to the "Display Operation Manual" at the end of this Operation Manual. Functions that can be set from the information display Lens name Initialize operation Iris control Zoom control Focus control Tally Indicator CAFS IS Other Reset operation Lens code setting Initialize operation setting Iris gain Setting the auto iris gain Setting the remote iris gain Setting the iris correction to ON/OFF Setting the iris close detection to ON/OFF Setting the zoom servo start characteristics Setting the zoom servo stop characteristics Setting the zoom mechanism end stop characteristics Preset Setting the zoom servo start characteristics Setting the zoom servo stop characteristics Setting the analog demand curve characteristics CAM mode settings Setting the servo mode type from the zoom demand Focus demand curve characteristics Setting the tally lamp ON/OFF Tally lamp light quantity setting Setting the indicator ON/OFF Setting the CAFS ON/OFF IS mechanical lock setting IS operation switch setting IS mode setting Encoder output setting Setting the camera serial communication to ON/OFF Adjusting the Camera Fol Voltage Reset to default values Reference page in appendixes E4 E4 E4, E5 E5 E5 E6 E6 E6 E6 E7 E7 E7 E8 E8 E9 E6 E11 E8 E9 E10 E10 E10 E11 E11 E12 E1 E11