Canon DIGISUPER 80 manual for XJ100x9.3B AF XJ100x9.3B XJ95x12.4B XJ95x8.6B XJ - Page 41
General Safety, Information
View all Canon DIGISUPER 80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
GENERAL SAFETY INFORMATION Be sure to observe the safety warnings and cautions provided on the product and in this operation manual. Failure to observe these warnings and cautions may result in injury or accident. Read this operation manual carefully to familiarize yourself with its contents and ensure that you can operate the product properly. Also, store this manual in a safe place where it can easily be referenced whenever necessary. This operation manual uses the following symbols and terms to identify hazards in order to prevent accidents. WARNING This indicates a potentially hazardous situation which, if not heeded, may result in death or serious injury to you or others. Be sure to heed all warning notices to ensure safe operation at all times. CAUTION Indicates potentially hazardous situations which, if not heeded, may result in minor or moderate injury to you or other persons, or property damage. * (NOTE) Emphasizes essential information which, if not heeded, may make the product unworkable or cause it to function improperly. Helpful information for operation is also provided. 5. If it becomes necessary to repair this product, or to perform any operations or adjustments not mentioned in this operation manual, contact Canon's representative or the dealer who originally supplied the lens. 6. When this product is used in direct sunlight, the inside of the unit may be heated to high temperatures. When it is expected that the unit is exposed to elevated temperatures, take measures against heat as appropriate on the customer's side. * (NOTE) 1. Protect the lens from strong impacts of shocks. Striking or dropping the lens could damage it. 2. Since the lens is not completely waterproof, avoid directly exposing the lens to rain or snow. When the lens has to be used in rain or snow, provisions should be made to prevent the lens from getting wet. 3. Under dusty conditions, the lens should be mounted or dismounted with a cover placed over the mount so as to prevent dust from entering the inside. 4. Do not bring the lens from an area with a very cold ambient temperature abruptly into a warm room, as the lens may fog on the inside. If this happens, the lens cannot be used until the condensation clears. Take adequate countermeasures to ensure that condensation does not form. 5. If the lens is to be used in adverse environments, such as in a chemical laden atmosphere, consult with Canon's representative beforehand. DEALING WITH ABNORMALITIES HANDLING THE PRODUCT WARNING 1. Never allow water or other liquids to enter or be spilled on the product. Immediately stop using the product if water or other liquids get inside the product. Otherwise, fire or electric shock could result. 2. Do not stare at the sun or any other source of highintensity light through the lens. Doing so could injure your eyes. CAUTION 1. Always grasp the specified portions of the lens when transporting the lens, or when attaching or detaching it to or from the camera head. Otherwise, the lens may fall, possibly causing injury. 2. All mountings must be tightened securely. If any of the mountings become loose, the lens may fall, possibly causing injury. 3. Always grasp the connector itself when connecting or disconnecting the demand cable. Pulling on the cable portion may result in damage to the cable, such as breakage of the conductors. Power leaking from a damaged cable may present a fire or electric shock hazard. 4. Check periodically (for instance, every 6 months to 1 year) that all mountings are securely tightened. If any of the mountings become loose, the lens may fall, possibly causing injury. WARNING 1. Should any of the abnormalities described below occur, contact Canon's representative or the dealer who originally supplied the lens. • Smoke, unusual smell or unusual noise • Entry of foreign objects (including metals or liquids) inside the lens. MAINTENANCE AND INSPECTION WARNING 1. Unplug the demand cable and remove the lens from the camera, before attempting to clean the lens. Never use flammable substances such as benzene or thinner for cleaning, as this may present a serious fire or electric shock hazard.