Canon FAX-JX210P User's Guide - Page 74
In Case of a Power Failure, LCD Messages, During a Power Failure, MEMORY CLEAR REPORT, AUTO PRINT OFF
View all Canon FAX-JX210P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
In Case of a Power Failure The user data settings and registered data for one-touch speed dialing and coded speed dialing are saved during a power failure. However, documents stored in the fax memory will be deleted and redial data in the extension phone memory may be lost. If a power failure occurs or the power is turned off, the fax will automatically print a MEMORY CLEAR REPORT as soon as the power is turned on or the power is restored. This report includes a list of the documents that were stored in the memory at the time of power failure. During a Power Failure The following restrictions apply to the function of the fax during a power failure or while the power is turned off: z You cannot use the fax to make telephone calls. Also if your fax is connected to a telephone, you may not be able to make telephone calls. z You cannot send, receive, or copy documents. z You can receive voice calls only if a telephone, or an extension phone is connected to your fax. MEMORY CLEAR REPORT If you experience a power failure, the documents in the fax memory will be lost. As soon as power is restored to the fax, it will automatically print out a list of the documents that were stored in the memory at the time of the power failure. Note If the cartridge is empty or there is no paper in the Rear Tray when power is restored, the MEMORY CLEAR REPORT will not be printed even after the cartridge is replaced or paper is loaded. LCD Messages The following messages are displayed on the LCD when the fax is performing a function or encounters an error. AUTO PRINT OFF Cause The setting has been set to . AUTO REDIAL Action Set the setting to to print received faxes, ACTIVITY REPORT, TX REPORT, RX REPORT, MULTI TX REPORT, and MEMORY CLEAR REPORT automatically (see page 37). Cause Action The fax is waiting to redial the receiving number because the line was busy or the receiving party did not answer when you tried to send the document. Wait for the fax to automatically redial the number. If you want to cancel automatic redialing, press [Stop/Reset] (see page 29). Troubleshooting 73