Canon G10 PowerShot G10 Camera User Guide - Page 107

Shooting Using the Mode Dial 105 2 Select a movie mode. 1. Use the control dial to select a movie mode. • See Changing Colors (p. 148) for the procedures for using and . 3 Shoot. • Pressing the shutter button halfway automatically sets the exposure, focus and white balance settings. • Pressing the shutter button fully starts recording video and sound simultaneously. • During shooting, the recording time and [zRec] appear on the LCD monitor. • Pressing the shutter button fully again stops recording. Recording will stop automatically under the following circumstances. - When the maximum recording time or maximum recording capacity is reached - When the built-in memory or memory card becomes full z You are recommended to use a memory card that has been formatted in your camera to shoot movies (pp. 16, 220). z Be careful of the following while recording. - Try not to touch the microphone (p. 42). - If you press a button, the sound of the button being pressed will also be recorded. - The camera will automatically adjust the exposure and white balance to suit the shooting conditions during recording. Please note, however, that the sounds made by the camera while automatically adjusting the exposure may also be recorded. z The focus and optical zoom settings remain fixed for subsequent frames at the values selected for the first frame.