Canon G10 PowerShot G10 Camera User Guide - Page 154

152 2 Press the DISP. button. • The camera will switch to color input mode, and the display will alternate between the original image and the color swap image (using the previously set color). 3 Aim the camera so that the original color appears at the center of the LCD monitor and press the button. • Only one color can be specified. • You can use the or button or the control dial to specify the range of colors that are changed. -5: Only takes the color that you want to swap. +5: Also takes colors close to the one that you want to swap. 4 Aim the camera so that the desired color appears at the center of the LCD monitor and press the button. • Only one color can be specified. 5 Press the DISP. button to complete the setting, then shoot. z The default setting for Color Swap changes green into white. z You may not obtain the expected results if you use the flash. z The colors and color range specified in the Color Swap mode are retained even if the camera's power is turned off.