Canon G10 PowerShot G10 Camera User Guide - Page 264

262 4 Align the z mark on the conversion lens adapter with the z mark on the camera, and turn the adapter in the direction of the arrows until locked. • The conversion lens adapter can be taken apart into a front and back component, but be sure to use the adapter in its conjoined state. Also, make sure that the front and back components are firmly attached to each other before attaching the adapter to the camera. • To remove the conversion lens adapter, turn the adapter in the opposite direction with holding down the ring release button. 5 Set the lens on the adapter, and turn it in the indicated direction to attach it securely. z Completely remove all dust and dirt from conversion lenses with a lens blower brush before use. The camera may focus on any dirt that remains. z Be careful when handling the lenses since it is easy to get finger prints on them. z Be careful not to drop the camera or adapter when removing the ring. z When using these lens attachments, you should not shoot images in mode. It will not be possible to use the PhotoStitch software from your computer to accurately stitch the images together.