Canon PC150 PC150 Operator's Manual - Page 50

Problem, Possible Cause, Possible Remedy

Get Canon PC150 PDF manuals and user guides
UPC - 013803046014
View all Canon PC150 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

Troubleshooting What to Do If You Suspect There is a Malfunction If you suspect there is a malfunction with your copier, before calling a service representative, check the list below to see if you can solve the problem yourself. Problem Possible Cause Possible Remedy Copier will not operate. 3 The plug is not connected properly to the outlet. The power switch is OFF. Re-connect the power plug. Turn the power switch ON. Power will not turn ON / Power cuts off The top cover is open. during copying. Press the button and close the top cover firmly. The left cover is open. Press the middle of the left cover to close it securely. No copy image appears on copies. No original is set on the platen glass. Set an original on the platen glass. (See p.32. ) There is no cartridge installed. Install a cartridge (See p.21.) The sealing tape was not removed from the cartridge. Remove the sealing tape from the cartridge . (See p.21.) The copy exposure is not adjusted properly. Adjust the copy exposure. (See p.32.) What to Do If You Suspect There is a Malfunction 48 03/ PC150-USA 48 5/11/04, 4:56 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
Troubleshooting
48
3
What to Do If You Suspect
What to Do If You Suspect
There is a Malfunction
There is a Malfunction
If you suspect there is a malfunction with your copier, before calling a
service representative, check the list below to see if you can solve the
problem yourself.
Copier will not operate.
Power will not turn ON / Power cuts off
during copying.
No copy image appears on copies.
The plug is not connected properly to the
outlet.
The power switch is OFF.
The top cover is open.
The left cover is open.
No original is set on the platen glass.
There is no cartridge installed.
The sealing tape was not removed from the
cartridge.
The copy exposure is not adjusted properly.
Problem
Possible Cause
Possible Remedy
Re-connect the power plug.
Turn the power switch ON.
Press the
button and close the top cover
firmly.
Press the middle of the left cover to close it
securely.
Set an original on the platen glass.
(See p.32. )
Install a cartridge (See p.21.)
Remove the sealing tape from the cartridge .
(See p.21.)
Adjust the copy exposure. (See p.32.)
What to Do If You Suspect
There is a Malfunction
03/ PC150-USA
5/11/04, 4:56 PM
48