Canon PIXMA iP4200 Service Manual - Page 11
Press the Resume/Cancel button.
View all Canon PIXMA iP4200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
6 times Inner cover open. [1841]*2 Close the inner cover, and press the Resume/Cancel button. 7 times Inner cover open during printing Close the inner cover, and press the on paper. [1846]*2 Resume/Cancel button. Inner cover open during printing on paper (print continuable). [1851]*1 Close the inner cover, and press the Resume/Cancel button. Inner cover open during printing on paper (print NOT continuable). [1856]*1 Close the inner cover, and press the Resume/Cancel button to clear the error. The paper being printed at error occurrence will be ejected without printing the remaining data for the ejected paper, then printing will resume from the next page. Inner cover closed during CD / DVD printing (print continuable). [1850]*1 Open the inner cover which functions as the CD / DVD tray feeder, set the CD / DVD tray in the feeder, and press the Resume/Cancel button. Inner cover closed during CD / DVD printing (print NOT continuable). [1855]*1 Open the inner cover, and press the Resume/Cancel button to clear the error. The CD or DVD being printed at error occurrence will be ejected without printing the remaining data for the ejected CD or DVD, then the next print job will be done. Multiple ink tanks of the same color installed. [1681] Replace the wrong ink tank(s) with the correct one(s). 8 times Ink tank in a wrong position. [1680] Warning: The waste ink absorber becomes almost full. [1700] Install the ink tank(s) in the correct position. Pressing the Resume/Cancel button will exit the error, and enable printing. The service call error, indicating the waste ink absorber is full, is likely to occur soon. 9 times The connected digital camera or digital video camera does not support Camera Direct Printing. [2001] Remove the cable between the camera and the printer. 10 times 11 times Automatic duplex printing cannot be performed. [1310] Failed in automatic print head alignment. [2500] Press the Resume/Cancel button to eject the Data which was to paper being used at error occurrence. be printed on the Printing will resume from on the front side back side of paper of the next page. at error occurrence is skipped (not printed). Press the Resume/Cancel button. - If paper is being fed at error occurrence, the error is indicated after the paper is ejected. - If the error occurs, the print head alignment values are not changed. - After exit from the error by the The error is indicated when the pattern is not printed due to no ink or non-ejection of ink, or when the sensor's AD value 1-6