Canon PIXMA iP4200 Service Manual - Page 14

Warnings, Troubleshooting by Symptom - print status page

Get Canon PIXMA iP4200 PDF manuals and user guides View all Canon PIXMA iP4200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

2-3. Warnings Printer (no LED indications): Displayed warning Low ink Status indication only. Remarks Print head temperature rise If the print head temperature is high when the access cover is opened, the warning is displayed*1. When the print head temperature falls, the warning is released. Protection of excess rise of the print head temperature If the print head temperature exceeds the specified limit, a Wait is inserted during printing, *1: If the warning is displayed, the carriage does not move to the ink tank replacement position when the access cover is opened. 2-4. Troubleshooting by Symptom Symptom The power does not turn on. The power turns off immediately after power-on. Solution Replace the - AC adapter, or - logic board ass'y*1. Remarks Faulty operation A strange noise occurs. Remove foreign material, or attach a removed part if any. Printing stops mid-way. Replace the logic board ass'y*1. Multiple sheets feed. Replace the - sheet feed unit, or - cassette. Paper feed problems Paper does not feed. Remove foreign material, or replace the - sheet feed unit, or - cassette. Paper feeds at an angle. Remove foreign material, adjust the paper guide, or replace the - sheet feed unit, or - cassette. No printing, or no color ejected. Replace the - ink tank, 1-9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
2-3.
Warnings
Printer (no LED indications):
*1:
If the warning is displayed, the carriage does not move to the ink tank replacement position when the access
cover is opened.
2-4.
Troubleshooting by Symptom
Displayed warning
Remarks
Low ink
Status indication only.
Print head temperature rise
If the print head temperature is high when the access cover is opened,
the warning is displayed
*1
.
When the print head temperature falls, the warning is released.
Protection of excess rise of the print
head temperature
If the print head temperature exceeds the specified limit, a Wait is
inserted during printing,
Symptom
Solution
Remarks
Faulty operation
The power does not turn on.
The power turns off immediately
after power-on.
Replace the
- AC adapter, or
- logic board ass'y
*1
.
A strange noise occurs.
Remove foreign material, or attach a
removed part if any.
Printing stops mid-way.
Replace the logic board ass'y
*1
.
Paper feed
problems
Multiple sheets feed.
Replace the
- sheet feed unit, or
- cassette.
Paper does not feed.
Remove foreign material, or replace
the
- sheet feed unit, or
- cassette.
Paper feeds at an angle.
Remove foreign material, adjust the
paper guide, or replace the
- sheet feed unit, or
- cassette.
No printing, or no color ejected.
Replace the
- ink tank,
1-9