Canon PIXMA iP4200 Service Manual - Page 13

5 times 6 times 7 times 8 times 9 times 11 times - Logic board ass'y (QM2-2670)*1 ASF (cam) sensor error [5700] - Sheet feed unit (QM2-2211) Internal temperature error [5400] Waste ink absorber full [5B00] - Logic board ass'y (QM2-2670)*1 - Ink absorber kit (QY5-0146) Print head temperature rise error [5200] - Print head (QY6-0059) - Logic board ass'y (QM2-2670)*1 EEPROM error [6800] - Logic board ass'y (QM2-2670)*1 Carriage lift mechanism error [5110] - PR lift shaft ass'y (QL2-0936) - Sheet feed unit (QM2-2211) - Logic board ass'y (QM2-2670)*1 - Carriage lift sensor unit (QM2-2678) 12 times 13 times AP position error [6A00] Paper feed position error [6B00] - Sheet feed unit (QM2-2211) - Logic board ass'y (QM2-2670)*1 - Purge unit (QM2-2208) - Sheet feed unit (QM2-2211) - Logic board ass'y (QM2-2670)*1 14 times 15 times 16 times Paper feed cam sensor error - Sheet feed unit (QM2-2211) [6B10] - Logic board ass'y (QM2-2670)*1 USB Host VBUS overcurrent - Logic board ass'y (QM2-2670)*1 [9000] Valve sensor error [6C00] - Logic board ass'y (QM2-2670)*1 - Purge unit (QM2-2208) 17 times 19 times Motor driver error [6D00] - Logic board ass'y (QM2-2670)*1 Ink tank position sensor error - Platen unit (QM2-2202) [6502] - Logic board ass'y (QM2-2670)*1 20 times Other hardware error [6500] - Logic board ass'y (QM2-2670)*1 Continuous alternate blinking Alarm LED lit ROM error RAM error - Logic board ass'y (QM2-2670)*1 - Logic board ass'y (QM2-2670)*1 *1: Before replacement of the logic board ass'y, check the waste ink amount (by service test print or EEPROM information print). If the waste ink amount is 7% or more, also replace the ink absorber kit (QY5-0146) when replacing the logic board ass'y. [See Section 3-3. Adjustment / Settings, (5) Service mode, for details.] 1-8