Canon PIXMA iP4200 Service Manual - Page 12
Service Call Errors by Cyclic Blinking in Orange Alarm LED and Green, Power LED, or Alarm LED Lit - refill ink
View all Canon PIXMA iP4200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Resume/Cancel button, the automatic print is incorrect. head alignment will not be re-done. 13 times 14 times 15 times The remaining ink amount unknown. [1683] Ink tank not recognized. [1684] Ink tank not recognized. [1410 to 1419] Access cover open. [1200] An ink tank which has once been empty is installed. Replace the applicable ink tank with a new one. A non-supported ink tank is installed (the ink tank LED is turned off). Install the supported ink tanks. An error occurred in an ink tank (the ink tank LED is turned off). Replace the ink tank(s). Close the access cover. Printing with a once-empty or refilled ink tank can damage the print head. If printing is continued without replacing the "nogood" ink tank, press the Resume/Cancel button for 5 sec. or longer to record the use of a refilled ink tank. Note: After the above operation, the function to detect the remaining ink amount is disabled. *1: Only for models supporting CD / DVD printing *2: Only for models not supporting CD / DVD printing 2-2. Service Call Errors (by Cyclic Blinking in Orange (Alarm LED) and Green (Power LED), or Alarm LED Lit in Orange) Cycles of blinking in orange (Alram LED) and green (Power LED) Error [Error code] 2 times Carriage error [5100] Solution (Replacement of listed parts, which are likely to be faulty) - Carriage unit (QM2-2207) - Timing slit strip film (QC1-6394) - Logic board ass'y (QM2-2670)*1 - Carriage motor (QK1-1500) 3 times Line feed error [6000] - Timing sensor unit (QM2-2683) - Timing slit disk film (QC1-6229) - Feed roller ass'y (QL2-0925) - Platen unit (QM2-2202) - Logic board ass'y (QM2-2670)*1 - PAPER FEED MOTOR (QK1-1502) 4 times Purge cam sensor error [5C00] - Purge unit (QM2-2208) 1-7