Canon PIXMA iP4200 Service Manual - Page 28

3 times Paper feed roller cleaning setting). 4 times Automatic print head alignment Set a sheet of plain paper (A4 or letter) in the ASF. 5 times Bottom plate cleaning 6 times Unspecified Fold a sheet of plain paper (A4 or letter) in half crosswise, then unfold and set it in the ASF with the folded ridge facing down. 7 times 8 times or more The widest head-to-paper distance setting Unspecified (5) Service mode Function Service test print - Model name - Destination - ROM version - USB serial number - Waste ink amount - CD / DVD sensor correction value - Ink system function check result - CD / DVD sensor correction result Procedures See "Service mode operation procedures" below. Remarks Set a sheet of A4 or letter size paper. For print sample, see 3-4. Verification Items, (1) Service test print, . EEPROM initialization See "Service mode operation procedures" below. The following items are NOT initialized, and the shipment arrival flag is not on: - USB serial number - Destination settings - Waste ink counter - CD / DVD correction value Waste ink counter reset See "Service mode operation procedures" below. Destination settings See "Service mode operation procedures" below. If the waste ink amount is 7% or more, replace the ink absorber kit. Note: At the end of the service mode, press the Power button. To protect the media sensor from being dislocated during transportation, the paper lifting plate of the sheet feeder unit will be raised. 1) With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button. (DO NOT release the buttons. The Power LED lights in green to indicate that a function is selectable.) 2) While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.) 3) While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.) 4) When the Power LED lights in green, press the Resume/Cancel button the specified number of time(s) 1-23