Canon PowerShot S1 IS PowerShot S1 IS Camera User Guide - Page 135
Auto ISO, ISO 100 equivalent, Problem, Cause, Solution
View all Canon PowerShot S1 IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Problem Cause Solution Subject in recorded image is too dark Insufficient light for shooting. Subject dark in comparison to the background. Set the built-in flash to on. zSet the exposure compensation to a positive (+) setting. zUse the AE lock or spot metering function. See Locking the Exposure Setting (AE Lock) (p. 86) and Switching between Light Metering Modes (p. 76). Subject too far for flash to reach. zTo use the built-in flash, shoot within the following ranges: Auto ISO: 1.0 to 4.2 m (3.3 to 14 ft.) of the subject at the maximum wide angle and within 1.0 to 3.0 m (3.3 to 9.8 ft.) at the maximum telephoto setting. ISO 100 equivalent: 1.0 to 3.8 m (3.3 to 12 ft.) of the subject at the maximum wide angle and within 1.0 to 2.5 m (3.3 to 8.2 ft.) at the maximum telephoto setting. zRaise the ISO sensitivity and then shoot. See Changing the ISO Speed (p. 81). Subject recorded in image is too bright Subject too close causing flash to be too bright. Adjust the flash output with the flash exposure compensation function (p. 89). Subject bright in comparison to the background. zSet the exposure compensation to a negative (-) setting. zUse the AE lock or spot metering function. See Locking the Exposure Setting (AE Lock)(p. 86) and Switching between Light Metering Modes (p. 76). Light shining directly on subject or reflected off Change the shooting angle. subject into camera. Flash set to On. Set the flash to Auto or Off. A vertical bar of light Subject too bright (red, purple) appears on the LCD monitor/in the viewfinder This is a normal occurrence in devices containing CCDs and does not constitute a malfunction. (This red bar of ight will not be recorded when shooting still photos, but it will be recorded when shooting movies.) Appendix 133