Canon PowerShot S1 IS PowerShot S1 IS Camera User Guide - Page 16
Installing the Batteries/CF Card
View all Canon PowerShot S1 IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Installing the Batteries/CF Card Install the batteries and the CF card to get ready for shooting. Battery cover lock b Please use four AA-size alkaline batteries or a separately sold nickel metal hydride (NiMH) batteries. When the indicator blinks, the camera is writing, reading, erasing or transmitting an image to or from the card. Do not perform the following or image data may be lost or corrupted: zDo not shake the camera. zDo not turn off the power or open the CF card slot cover or the battery cover. The use of the separately sold Compact Power Adapter CA-PS700 is recommended to power the camera during long usage sessions (p. 143). The separately sold battery charger kit lets you use rechargeable NiMH batteries to power the camera (p. 140). See Battery Performance (p. 150). For information about the Battery and Charger Kit and AA-size rechargeable NiMH batteries, see the System Map (separate from this guide). aBe sure that the camera power is off (p. 19). Slide the battery cover lock in the direction of the arrow and open the cover. bInsert the batteries as shown. z You can check the orientation the batteries should go in on the seal inside the battery compartment. cClose the battery cover. 14 1. Preparing the Camera