Canon VB-M740E Camera Management Tool User Manual - Page 50

Load a Camera Specification File You can load a saved camera specification file to display that information in the camera list of this tool. You can also configure the tool so that the camera specification file is automatically loaded when this tool launches. 1 Select [File] > [Load camera specification file]. The [Open] dialog box appears. 2 Specify the save location and file name of the camera specification file and click [Open]. The camera list is displayed in this tool according to the camera specification file. Note If you changed the camera settings after creating a camera specification file, load the camera specification file in this tool and click to update the camera information. Loading the Camera Specification File Automatically at Launch You can set whether to load the camera specification file automatically when this tool launches. 1 Select [File] > [Environmental Settings]. The [Environmental Settings] dialog box appears. 2 Configure the settings for the camera specification file on the [File] tab. (1) (2) (3) (4) (5) (1) [Enable Camera Specification File] Select this check box to automatically load a camera specification file at launch. If you select this check box, enter the save location and file name of the camera specification file in the input field. (2) [Do Not Add new camera(s)] Select this when you want to limit cameras displayed in the list to those described in the camera specification file. Selecting this disables addition of cameras to the list, using searches and manual addition and deleting of cameras. This is only available when [Enable camera specification file] is selected. When this check box is selected, [Use camera specification file] is grayed out and the setting cannot be changed. When you load a different camera specification file, the current list is completely discarded and only the cameras in the newly loaded camera specification file are displayed in the list. When you load a different camera specification file, the current list is completely discarded, and only the cameras in the newly loaded camera specification file will appear in the list. (3) [Do not save on exit] This is available when [Enable camera specification file] is selected. Select this check box if you do not want the [Export Camera List] dialog box to be displayed when this tool is exited. 50