Casio CW-L300 User Guide - Page 31

■ To control the overall label length using a fixed tape length 1. In the Free Design Mode, input the text you want. 2. Press FORM. • If your label has only one block, advance directly to step 4 of this procedure. 3. Use and to select ALL FORM, and then press SET. 4. Use and to scroll to the T-LENGTH setting screen. 5. Use and to change the setting to FIX, and then press . 6. Use the number keys, or the (decrease) and change the label length setting. (increase) keys to Length value becomes highlighted. • The appearance of the tape length value on the display will change in accordance with your setting as described below. [20.6cm] 20.5cm] ➜ ➜ Label can be printed as specified. Label will be printed but the tape length will be longer than specified. FREE DESIGN: Aligning Tape Label Text This section explains how to align tape label text within a block and how to align blocks within a tape label. Example 1: Aligning the term "Round Estimate1" in a block (fixed block length) LEFT EQUAL CENTER RIGHT ■ To align tape label text 1. In the Free Design Mode, input the text you want, and divide it into blocks as required. • See page 22 for information about blocks. 2. Move the cursor the block whose text you want to align, and then press FORM. • Here we will move the cursor to the block that contains "Round". • If your label has only one block, advance directly to step 5 of this procedure. 3. Use and to select BLOCK FORM, and then press SET. 4. Use and to select ONE BLOCK, and then press SET. 5. Use and to scroll to the ALIGN setting screen. 6. Use and to select the alignment setting you want. • Each press or and cycles the setting between EQUAL, CENTER, RIGHT, and LEFT. 29 E