Casio CW-L300 User Guide - Page 67

Message NOT ENOUGH MEMORY! SET/ESC NOW PRINTING ODD (EVEN) NUMBER OF DIGITS! PENDING DATA WILL BE LOST CONTINUE? SET/ESC Cause and Action • There is not enough memory available to save the data you are editing. ➜ To edit and print without saving the data, press SET to continue. If you want to save the data, delete memory data you no longer need. • The printer has overheated. ➜ Stand by and printing will resume as soon as the printer returns to normal temperature. * If the "NOW PRINTING" message remains on the display and it appears as if printing will not resume, contact your retailer or your nearest CASIO service center. • You specified no check digit for an ITF barcode and input an odd number of digits. ➜ Append a zero to the beginning and re-input. • You specified a check digit for an ITF barcode and input an even number of digits ➜ Append a zero to the beginning and re-input. • To delete the text, press SET. • If you do not want to delete the text, press ESC. See page: 54 - 36 - Message PRINT ERROR! CHECK THE TAPE CARTRIDGE! Cause and Action • The tape became jammed during printing. ➜ Turn off the printer and remove the tape cartridge. Next, remove the jammed tape. • There is something stuck in the auto tape cutter. ➜ Turn off the printer and remove the tape cartridge. Next, remove whatever is stuck in the auto tape cutter. • There is dirt, tape pieces, or other foreign matter stuck to the rubber roller. ➜ After removing the foreign matter from the rubber roller, clean the rubber roller. • The printer is being used in an area that is exposed to direct sunlight or some other source of bright light, causing malfunction of its optical sensor. ➜ Turn off the printer and then move it to a location that is not exposed to bright light. * If the steps described above do not clear the error message, contact your retailer or your nearest CASIO service center. See page: Startup Guide, page 13 58 - 65 E