Casio CW-L300 User Guide - Page 33

6. Use the number keys, or the (decrease) and (increase) keys to change the label length setting. • Use a label length setting that is longer than the value that originally appears on the display. 7. Use to scroll to the B-ALIGN setting screen. 8. Use and to select the alignment setting you want. • Each press or and cycles the setting between EQUAL, CENTER, RIGHT, and LEFT. FREE DESIGN: Changing the Size of Tape Label Text Normally when you print, the printer automatically selects the optimum character size in accordance with the tape width and the number of text lines (Auto Fit). You can also use the procedures in this section to override the Auto Fit feature and specify the character sizes you want to use. There are two ways to specify the character size: • Specifying the size of a string of characters • Specifying the size of text lines Important! • Note that the character size values that you specify do not indicate absolute sizes, but rather multipliers. A size of "2×3" for example, specifies double the normal height and three times the normal width. Specifying the Size of a String of Characters You can specify the size in the range of 1×1 to 5×8 for a string of characters. Note that the maximum vertical size you can specify depends on the width of the tape you are using. For more information, see the "Tape Width and the Number of Lines and Character Sizes" on page 72. 1×1 2×3 4×4 5×6 • Note that how a character size specification affects text depends on whether the text is vertical or horizontal. 1×2 (Horizontal) 1×2 (Vertical) 31 E