Casio CW-L300 User Guide - Page 60
Caring for the Printer
UPC - 079767168582
View all Casio CW-L300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Caring for the Printer Disc and tape label printing can become unclear if the printer's print head and rubber roller become dirty. Perform the following steps to clean the print head and rubber roller. ■ To use a cotton swab for cleaning Important! • Use only a cotton swab or some other soft material to clean the print head and rubber roller. Use of a very fine type cotton swab is recommended. 1. Press the cassette cover release and open the cover. • If a tape cartridge or the ink ribbon cassette adaptor is loaded in the printer, remove it. 2. Use a cotton swab moistened with alcohol to thoroughly swab the areas where the print head and rubber roller come into contact. Print head ■ To clean with a cleaning tape Note • Use an optionally available cleaning tape (XR-24CLE) to perform this procedure. 1. Press the cassette cover release and open the cover. • If there is a tape cartridge or ink ribbon cassette adaptor loaded in the printer, remove it. 2. Load the cleaning tape into the printer. 3. Press to turn on the printer. 4. Press FUNCTION and then FEED to feed the tape one or two times. • For details about using the cleaning tape, see the instructions that come with it. Rubber roller • You can rotate the rubber roller by pressing FUNCTION and then FEED. • You can also use a commercially available cassette tape recorder head cleaning kit to clean the print head. E 58 Cleaning the Printer Exterior Wipe the exterior of the printer with a cloth moistened with plain water. Wring all excess liquid from the cloth before wiping the printer. Never use benzene, alcohol, thinner, or other volatile agents to clean the printer exterior. Doing so can damage the case.